I. WE67K- 250T3200 Hydraulic Press Brake machine Main technical parameters:
Large frame 400H, side frame is 300 channel steel,
Dimensions: 6000mm* 1000 mm* 2000mm
Length: 6 meters
Toughness: 550 mpa
Weight: about 1 ton
Motor power: 4KW
Hydraulic oil tanker: 30 kg
Suitable coil thickness: 0.3mm-0.8mm steel coil thickness is acceptable.
Two, the use of bending machine
1. First, switch on the power supply, open the key switch on the control panel, and then press the oil pump to start, so that you can hear the rotation sound of the oil pump. (The machine does not move at this time)
2, stroke adjustment, the use of bending machine must pay attention to adjust the stroke, must be tested before bending. Bending machine die down to the bottom must ensure that there is a plate thickness clearance. Otherwise, the mold and the machine will be damaged. Stroke adjustment is also electric quick adjustment and manual stomach adjustment.
3, bending notch selection, generally choose the plate thickness of 8 times the width of the notch. For bending 4mm sheet metal, choose about 32 notches.
4, the rear stopper adjustment generally has electric quick adjustment and manual fine tuning, the method is the same as the shearing machine.
5, step on the foot switch to start bending, bending machine and shearing machine is different, can be loosened at any time, loosen the foot bending machine will stop, continue to step down
