The Introduction of 4000W Laser Cutting Machine in detail
Laser cutting process is the use of invisible light beam instead of the traditional mechanical knife, with high precision, cutting fast, not limited to cutting pattern restrictions, automatic layout to save material, smooth kerf, low processing costs, etc., will gradually improve or replace the traditional metal cutting process equipment. The laser cutting machine is more and more important in industrial production, so today this article will write a detailed introduction of the 4000W laser cutting machine. The Working principle of laser cutting Laser cutting may be quite non-contact processing with high energy density and good controllability. It uses the beam emitted from the laser generator to focus the beam into a spot with a minimum diameter of but 0.1mm through the optical path system, to realize high power density beam irradiation conditions. After the warmth of the laser is absorbed by the irradiated workpiece material, the workpiece temperature rises sharply and reaches the freezing point. the fabric begins to liquefy and form holes, and with the high-pressure airflow, with the relative position of the beam and therefore the workpiece moving, the fabric finally forms an endless slit. To accelerate the melting of the fabric, blow away the slag and protect the cutting seam from oxidation, it's necessary to feature auxiliary gas suitable for the fabric to be cut, to realize excellent cutting speed and cutting quality. At present, the common cutting methods mainly include straight cutting, wire cutting, profiling cutting, flame-cutting, water jet cutting, laser cutting than on. Among them, laser cutting is more and more widely utilized in steel plates under 16mm due to its… Read More »The Introduction of 4000W Laser Cutting Machine in detail
