I. Safety operating rules for four - roll plate winder Machine parameters and performance
1, can produce diameter of 1-5 meters steel pipe
2, the width of the steel base material is less than 3.2 meters
3, the thickness of steel plate is less than 80mm
Two, safe operation rules
1, rolling machine must have a special person responsible for the management.
2. The operator must be familiar with the structure and performance of the plate rolling machine and the method of use. After the approval of the responsible management personnel, the operation can be carried out.
3. Carefully check whether the safety device is intact before starting the machine.
4. During operation, hands and feet are strictly prohibited to be placed on rollers, transmission parts and workpieces.
5. After the work is interrupted, the clutch should be hit to neutral.
6, many people must have special command to cooperate with the operation.
7. Overload work is strictly prohibited.
8. The tipping and resetting of the lifting and overturning bearing of the upper roller and the balance of the upper roller must be carried out after the main drive is stopped.
9. It is forbidden to pile up workpieces and sundries in the workplace, and keep the machine tools and the site clean at all times.
10. After the operation is finished, the power supply should be cut off and the power box should be locked.