Daily organic glass laser cutting machine we also called plexiglass laser cutting machine. Often used for cutting, engraving or punching, plexiglass products, acrylic crafts, window lenses, transparent chassis, advertising products, packaging boxes, display shelves, crystal words, etc. So how should plexiglass laser cutting machine be maintained in daily use?
1. Fill the linear guide rail with lubricating oil. The dust produced by the plexiglass laser cutting machine will corrode the guide rail for a period of time, so the guide rail should be maintained regularly. Turn off the power of the laser cutting machine, clean it with a clean soft cloth guide rail, and then drop lubricating oil on the guide rail. After oiling, let the slider roll back and forth on the guide rail to ensure that the lubricating oil enters the slider.
Two, often wipe the mirror, focusing lens, plexiglass laser cutting machine used for a period of time, smoke will be attached to the surface of the lens, affecting the depth of cutting and cutting accuracy. As a general rule: three mirrors and one focusing mirror are carefully wiped clean with anhydrous alcohol after one week of use.
Three, lubricating bearings, plexiglass laser cutting machine uses a large number of bearings. In order to ensure good cutting effect, some bearings need to be oiled regularly. Wipe off the floating soil on the bearing with a clean soft cloth, suck the oil into the needle with a needle, then slowly inject the oil into the bearing with a needle, and slowly turn the bearing when refueling.
Maintenance of the laser tube, the laser tube in the plexiglass laser cutting machine is cooled by circulating water. After long-term use, some white stains will form in the test tube. At this time, a small amount of vinegar can be added to the circulating water to remove the water in the tube, and then rinse the inside of the laser tube with clean water. In this way, the laser tube will be in a better working state, its service life will be extended.